LI Yuqing WANG Cirong GU Zhaofeng Research Institute of Daye Steel Works
,
Huangshi
,
China Senior Engineer
,
Research Institute of Daye Steel Works
,
Huangshi 435001
,
China
金属学报(英文版)
Determination of(Fe,Cr)_7C_3 in Cr27 cast iron results about 30 v.-%.Minor Si and Mn are present.Sectional area of the M_7C_3 grains is 1—50μm~2.Combining matrix analysis of elec- tron diffraction pattern with calculated angle between plane traces,{011}twins and also {013}twins producing local environment for Ru_7B_3 are observed in the orthorhombic M_7C_3. A crystallographic model for M_7C_3 is proposed.
关键词:
cast iron
,
null
,
null
,
null
,
null
S.H.O
材料科学技术（英）
The magnetic property of soft magnetic metals and alloys depends strongly on the crystallographic orientation. In automated equipment for orientation research. the intensity for drawing up the pole figure is measured in detail. The present research shows that the accurate pole figure can be drawn up without measuring concretely the intensity. For directional Si steel sheet the measuring step may be 4 similar to 5 degrees. In this paper the experimental equation for defocusing correction was derived from the experimental data in different specimens with random orientation.
关键词:
H.Q.Chen
,
J.S.Liu
,
H.G.Guo
金属学报(英文版)
Mn18Cr18N, the high-nitrogen steel, is the 2nd generation material for manufacturing the retaining ring of firepower generators. In this paper, the hot deformation behavior of the material was investigated by thermo-mechanical modeling tests. And the flow stress curves of the steel were obtained for various combinations of the temperature and strain rate.Based on the results of the tests, the complex forming process of a retaining ring including punching, expanding and extrusion with an enclosure was put forward and simulated by means of numerical simulation method. The results indicate that the process is a novel and force-saved practical technology for manufacturing heavy retaining rings.
关键词:
Mn18Cr18N high-nitrogen steel
,
null
,
null
Jinxia LI
,
Xianghua LIU
,
Guodong WANG
材料科学技术（英）
The relationships among the deformation, texture and deep drawing properties of IF steel were investigated. By adopting double cold rolling (DCR) technology, the deep drawing property has been developed evidently. With the aid of orientation distribution function (ODF) analysis, it was found that the main reason for good property is the counterbalance in intensity of the ideal texture component {111}<011> and {111}<112>.
关键词:
Texture
,
null
,
null
,
null
X.H. You
,
Q.L. Zhang and H.G. Guo Taiyuan Heavy Machinery Institute
,
Taiyuan 030024
,
China
金属学报(英文版)
The significance of this paper lies in the application of bending-upsetting 35CrMo steel in train crack-shaft. The hot deforming tests of 35CrMo steel have been done on the Gleeble-1500 testing machine with the deformation temperature at the range of 900癈-1250癈, a strain strain of 0.05 s-1, 0.5 s-1, 1.0 s-1 and compress degree of 15%-80%. Through respectively analyzing and studying the microstructure of the specimen and getting the data from the testing, the results obtained are as follows: the model of flow stress and the stress-strain relationship of material hot deformation, the model of dynamic and static re-crystallization and the correlative references of hot forming parameters and changes of microstructure. The hot deforming stress-strain curses and relevantly re-crystallized micro-structure of 35CrMo steel are drawn at the deformation temperature of 1250 and the strain rate of 1.0 s. Through analyzing and regressive calculating the grain size of the deformation specimen of 35CrMo steel at different locations under the large-deformation and high-temperature conditions, the hot-deforming model of grain calculation is verified. The experimental results and the model of grain calculation can provide scientific basis for analyzing the hot deformation processes and controlling quality.
关键词:
35CrMo steel
,
null
,
null
W.N.Liu 1)
,
M.N.Fang 2)
,
J.Xing 1) and Y.W.Liu 3) 1) Department of Mechanical Engineering
,
Changchun Institute of Optics and Fine Mechanics
,
Changchun 130022
,
China 2) Changchun Institute of Post and Telecommunications
,
Changchun 130022
,
China 3) Changchun Institute of Optics and Fine Mechanics
,
Changchun 130022
,
China
金属学报(英文版)
In this paper, we describe the laser heat-treating experiment results of three kind tool high-speed steel test samples. After laser quenching and tempering of three kinds of annealed tool high speed steel (W18Cr4V, W9Mo3Cr4V1, W6Mo5Cr4V2) test samples, we used microhardness-measure to test the samples and analyzed such problems as the hardness and depth of hardening quenching layer. Furthermore, after laser quenching and tempering of the quenched and three time tempered high speed steel (W18Cr4V) and its hardness analyzing, we got lase quenching's different results of the samples under different initial heat treating.
关键词:
high-speed steel
,
null
,
null
材料科学技术（英）
BIOSS4 steel is essentially a nickel-free austenitic stainless steel developed by the Institute of Metal Research, Chinese Academy of Sciences, in response to nickel allergy problems associated with nickel-containing stainless steels that are widely used in medical applications. The high nitrogen content of this steel effectively maintains the austenitic stability and also contributes to the high levels of corrosion resistance and strength. BIOSS4 steel possesses a good combination of high strength and toughness, better corrosion resistance, and better blood compatibility, in comparison with the medical 316L stainless steel. Potential applications of BIOSS4 steel can include medical implantation material and orthodontic or orthopedic devices, as well as jewelries and other decorations.
关键词:
medical stainless steel;nitrogen;nickel-free;nickel-allergy;blood;compatibility;austenitic steels;high-nitrogen;corrosion;cells
Yibin REN
,
Ke YANG
,
Bingchun ZHANG
,
Yaqing WANG
,
Yong LIANG
材料科学技术（英）
BIOSS4 steel is essentially a nickel-free austenitic stainless steel developed by the Institute of Metal Research, Chinese Academy of Sciences, in response to nickel allergy problems associated with nickel-containing stainless steels that are widely used in medical applications. The high nitrogen content of this steel effectively maintains the austenitic stability and also contributes to the high levels of corrosion resistance and strength. BIOSS4 steel possesses a good combination of high strength and toughness, better corrosion resistance, and better blood compatibility, in comparison with the medical 316L stainless steel. Potential applications of BIOSS4 steel can include medical implantation material and orthodontic or orthopedic devices, as well as jewelries and other decorations.
关键词:
Medical stainless steel
,
null
,
null
,
null
,
null
